Table of Contents
Advertisement
RENEGADE GAUGE
1. DPS mode display
2. To change DPS ASSIST mode, press and hold
the OVERRIDE/DPS/ACS button for approxi-
mately 2 seconds to go to the next setting.
The DPS system will toggle to the following avail-
able mode. The newly activated DPS mode will
be briefly displayed in the multifunction gauge.
3. Repeat previous step to toggle through the
available mode.
NOTE: The DPS mode of operation cannot be
changed if the vehicle is in reverse, of if the ACS
mode is displayed in the multifunction gauge. The
DPS/Override switch must be released between
each DPS mode selection.
TROUBLESHOOTING
TROUBLESHOOTING FLOW
CHARTS
Use the troubleshooting flow charts to diagnose a
problem. If a problem cannot be solved, contact
a service representative for support before replac-
ing a DPS.
Here is the list of provided flow charts:
– Flow chart A: No Assistance From DPS
– Flow chart B: DPS Intermittent Assistance
– Flow chart C: Derating or Limited Assistance
– Flow chart D: Free Play Felt in Steering System
– Flow chart E: Steering Turn Easier on One Side
than the Other.
vmr2013-040
Subsection XX (DYNAMIC POWER STEERING (DPS))
5
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
