BRP Can-Am Outlander 2015 Series Manual page 64

PERIODIC MAINTENANCE
PROCEDURES
SERVICE TOOLS
Description
TEST CAP ......................................................................................
VACUUM/PRESSURE PUMP ........................................................
SERVICE PRODUCTS
Description
AIR FILTER CLEANER ...................................................................
AIR FILTER OIL .............................................................................
BRAKE FLUID................................................................................
BRP PREMIXED COOLANT ..........................................................
CABLE LUBRICANT ......................................................................
SUSPENSION GREASE .................................................................
XPS 4-STROKE SYNTH. BLEND OIL (SUMMER) .........................
XPS 4-STROKE SYNTHETIC OIL (ALL CLIMATE) .........................
XPS BRAKES AND PARTS CLEANER (USA) .................................
XPS SYNTHETIC GEAR OIL (75W 140) ........................................
XPS SYNTHETIC GEAR OIL (75W 90) ..........................................
XPS SYNTHETIC GREASE.............................................................
GENERAL
This subsection provides:
– Fluid level verifications
– Maintenance procedures.
The following systems should be serviced accord-
ing to the PERIODIC MAINTENANCE SCHED-
ULE .
PROCEDURES
ENGINE (AIR INTAKE SYSTEM)
Engine Air Filter Maintenance
Guideline
As with any ATV, air filter maintenance is critical to
ensure proper engine performance and life span.
Air filter maintenance should be adjusted accord-
ing to riding conditions.
Air filter maintenance must be increased in fre-
quency and oil must be added to the foam filter
for the following dusty conditions:
– Riding on dry sand
– Riding on dry dirt covered surfaces
– Riding on dry gravel trails or similar conditions.
vmr2013-056
Subsection 03 (PERIODIC MAINTENANCE PROCEDURES)
NOTE: Riding in a group in these conditions
would increase even more the air filter mainte-
nance.
Engine Air Filter Removal
NOTICE
ponent in the air filter housing. Otherwise,
engine performance degradation or damage
can occur. The engine is calibrated to operate
specifically with these components.
1. Remove seat.
2. Remove console. Refer to
3. Rotate air filter cover counterclockwise to re-
move it.
NOTE: A socket wrench may be used to remove
the filter cover.
Part Number
529 035 991 ............................................. 9
529 021 800 ....................................... 9, 23
Part Number
219 700 341 ....................................... 3, 13
219 700 340 ............................................. 3
293 600 131 ........................................... 23
219 700 362 ............................................. 7
293 600 041 ........................................... 14
293 550 033 ..................................... 20–21
293 600 121 ............................................. 5
293 600 112 ............................................. 5
219 701 705 ..................................... 17, 22
293 600 140 ..................................... 11, 19
293 600 043 ..................................... 18–19
293 550 010 ........................................... 22
Never remove or modify any com-
Page
Page
BODY
subsection.
1