BRP Can-Am Outlander 2015 Series Manual page 732

Subsection XX (BODY (OUTLANDER))
5. Remove luggage tray. Refer to
TRAY
.
6. Lift rear portion of side panel assembly then pull
it towards outside.
NOTE: For Short Models, side panel assembly
includes side panel and panel extension.
NOTE: For Max Models, side panel assembly in-
cludes side panel, panel extension and rear side
panel extension.
vmr2012-043-026_a
LIFT REAR PORTION
Side Panel Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Align side panel front tab with slot, then push side
panel forward.
PANEL EXTENSIONS
Panel Extension Removal
1. Remove seat.
2. Remove console. Refer to
MOVAL
.
3. Remove rear luggage tray. Refer to
TRAY
.
4. Remove side panel assembly including side
panel, panel extension and rear side panel ex-
SIDE PANEL REMOVAL
tension. Refer to
5. Undo tabs securing panel extension to side
panel.
18
LUGGAGE
vmr2013-045-002_a
1. Tabs securing panel extension to side panel
2. Side panel extension
6. Remove panel extension.
Panel Extension Installation
Installation is the reverse of removal.
LUGGAGE TRAY
(MAX MODELS)
Luggage Tray Removal
1. Remove seat.
2. Remove retaining screws securing luggage tray
and rear top panel to frame.
CONSOLE RE-
LUGGAGE
.
vmr2013-045-015_b
1. Retaining screws securing luggage tray and rear top panel to
frame
3. Remove retaining screws securing luggage tray
to frame.
4. Remove rivets securing luggage tray to side
panels.
vmr2013-045