Rack; Rear Storage Compartment - BRP Can-Am Outlander 2015 Series Manual

Remove retaining screw securing upper bumper
to front fender and frame.
vmr2013-067-201_a
1. Retaining screw securing upper bumper to front fender
2. Retaining screw securing upper bumper to front fender and
frame
Remove upper bumper from vehicle.
Upper Bumper Installation
Installation is the reverse of removal.

RACK

Rear Rack Removal
1. Remove retaining bolts and nuts securing rack
assembly to frame.
vmr2013-045-011_a
1. Retaining nuts and bolts securing rack to frame
2. Frame
3. Rack assembly
2. Remove rack from vehicle.
3. Remove retaining screws securing rack to rail.
Rear Rack Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
vmr2013-067
Subsection 08 (BODY (OUTLANDER X mr))
TIGHTENING TORQUE
Screws and nuts
securing rear rack to rail
Screws an nuts securing
rear rack assembly
to frame

REAR STORAGE COMPARTMENT

REAR STORAGE COMPARTMENT
COVER
Rear Storage Compartment Cover
Replacement
1. Open rear storage compartment cover.
2. Push rear storage compartment cover forward
to release it from hinges.
vmr2012-043-030_a
TYPICAL
3. Install a new rear storage compartment cover
as the reverse of removal.
Rear Storage Compartment
Rear storage Compartment Removal
1. Remove rear body module. Refer to
BODY MODULE
.
2. Remove rear rack. Refer to
MOVAL
.
3. Remove rear storage compartment cover.
Refer to REAR STORAGE COMPARTMENT
COVER .
4. Remove retaining screws securing bottom of
RH rear storage compartment support.
4.5 N•m ± 0.5 N•m
(40 lbf•in ± 4 lbf•in)
4.5 N•m ± 0.5 N•m
(40 lbf•in ± 4 lbf•in)
REAR
REAR RACK RE-
21