BRP Can-Am Outlander 2015 Series Manual page 620

Subsection XX (DYNAMIC POWER STEERING (DPS))
vmr2012-039-032_a
vmr2012-039-033_a
1. Ensure proper contact here
7. Unscrew positioning screw and remove pusher
adapter and pull out DPS unit.
8. Install Pitman arm retaining washer and nut.
Tighten nut as specified.
vmr2012-039-022_a
1. DPS
2. Pitman arm
3. Pitman arm nut and washer
TIGHTENING TORQUE
Pitman arm retaining nut
26
72.5 N•m ± 7.5 N•m
(53 lbf•ft ± 6 lbf•ft)
9. Carry out a steering alignment as described in
this subsection.
vmr2013-040