Table of Contents
Advertisement
Chapter 12 Description of Parameter SettingsCFP2000
AFM2 Output Selection
AFM1 Output Selection
Settings
AFM1 DC Output Setting Level
AFM2 DC Output Setting Level
Settings
Pair with multi-function output: 23, Pr.03-32 and Pr.03-33 outputs constant AFM voltage.
Set Pr.03-32 between 0–100.00% to correspond to 0–10 V of AFM1.
Set Pr.03-33 between 0–100.00% to correspond to 0–10 V of AFM2.
AFM1 Filter Output Time
AFM2 Filter Output Time
Settings
Multi-function MO Output by AI Level Source
Settings
AI Upper Level
Settings
AI Lower Level
Settings
Multi-function output terminal "67" must work with Pr.03-44 to select input channels. When analog
input level is higher than Pr.03-45, multi-function output acts; when analog input level is lower
than Pr.03-46, multi-function output terminals stop outputting.
When setting levels, AI upper level must be higher than AI lower level.
Analog Input Curve Selection
Settings
0: 0–20 mA output
1: 4–20 mA output
0.00–100.00%
0.00–20.00 sec.
0: AVI1
1: ACI
2: AVI2
-100.00–100.00%
-100.00–100.00%
0: Regular Curve
1: Three-point curve of AVI1
2: Three-point curve of ACI
3: Three-point curve of AVI 1& ACI
4: Three-point curve of AVI2
12.1-03-20
Default: 0
Default: 0.00
Default: 0.01
Default: 0
Default: 50.00
Default: 10.00
Default: 7
Advertisement
Table of Contents
