Delta CFP2000 Series User Manual page 263

Chapter 12 Description of Parameter SettingsCFP2000
LOCAL / REMOTE Selection
Settings
 The default for Pr.00-29 is 0 (standard Hand-Off-Auto function). Set the AUTO frequency and
operation source with Pr.00-20 and Pr.00-21. Set the HAND frequency and operation source with
Pr.00-30 and Pr.00-31. Select or switch AUTO / HAND mode by using the digital keypad
KPC-CC01 or setting the multi-function input terminal MIx= 41, 42.
 When you set the external terminal (MI) to 41 and 42 (AUTO / HAND mode), Pr.00-29=1, 2, 3, 4
are disabled. The external terminal has the highest command priority, and Pr.00-29 functions in
standard HOA mode.
 When you do not set Pr.00-29 to 0, the Local / Remote function is enabled, and the top right
corner of digital keypad KPC-CC01 (firmware version 1.021 and above) displays "LOC" or "REM".
Set the REMOTE frequency and operation source with Pr.00-20 and Pr.00-21. Set the LOCAL
frequency and operation source with Pr.00-30 and Pr.00-31. Select or switch Local / Remote
mode with the digital keypad KPC-CC01 or set the multi-function input terminal MIx=56. The
AUTO key of the digital keypad is for the REMOTE function, and HAND key is for the LOCAL
function.
 When you set the external terminal (MI) to 56 for LOC / REM mode selection, if you set Pr.00-29
to 0, then the external terminal function is disabled.
 When you set the external terminal (MI) to 56 for LOC / REM mode selection, if Pr.00-29 is not
set to 0, then AUTO / HAND key is disabled, and the external terminal has the highest command
priority.
 Following table is the corresponded setting value for the PLC address:
PLC address /
Mode
M1090 =
M1091 =
M1092 =
M1100 =
M1101 =
0: Standard HOA function
1: Switch Local / Remote, the drive stops
2: Switch Local / Remote, the drive runs as the REMOTE setting for
frequency and operation status
3: Switch Local / Remote, the drive runs as the LOCAL setting for frequency
and operation status
4: Switch Local / Remote, the drive runs as LOCAL setting when switched to
Local, and runs as REMOTE setting when switch to Remote for frequency
and operation status.
HOA mode
HAND-ON AUTO-ON
0 0
1 0
0 1
0 0
0 0
12.1-00-12
LOC / REM mode
LOC-ON REM-ON
0 0
0 0
0 0
1 0
0 1
Default: 0
HOA mode
OFF
1
0
0
0
0