Delta CFP2000 Series User Manual page 351

Chapter 12 Description of Parameter SettingsCFP2000
PTC Level

Settings
 Sets AVI1/ACI/AVI2 analog input function Pr.03-00–03-02 to 6 [Positive Temperature Coefficient
(P.T.C.) thermistor input value].
 Use this to set the PTC level, the corresponding value for 100% is the analog input maximum
value.
Frequency Command for Malfunction
Settings
 When a malfunction occurs, check the current frequency command. If it happens again, it
overwrites the previous record.
Output Frequency at Malfunction
Settings
When a malfunction occurs, check the current output frequency. If it happens again, it overwrites

the previous record.
Output Voltage at Malfunction
Settings
 When a malfunction occurs, check the current output voltage. If it happens again, it overwrites the
previous record.
DC Voltage at Malfunction
Settings
 When a malfunction occurs, check the current DC voltage. If it happens again, it overwrites the
previous record.
Output Current at Malfunction
Settings
 When a malfunction occurs, check the current output current. If it happens again, it overwrites the
previous record.
IGBT Temperature at Malfunction
Settings
 When a malfunction occurs, check the current IGBT temperature. If it happens again, it
overwrites the previous record.
0.0–100.0%
0.00–599.00 Hz
0.00–599.00 Hz
0.0–6553.5 V
0.0–6553.5 V
0.0–6553.5 Amp
-3276.7–3276.7°C
12.1-06-15
Default: 50.0
Default: Read only
Default: Read only
Default: Read only
Default: Read only
Default: Read only
Default: Read only