Delta CFP2000 Series User Manual page 634

API
SMOV
13
D P
Bit device
X Y M K
S
＊
D
Notes on operand usage: none
S

m2
n
BCD mode (M1168 = Off):

SMOV enables and operates BCD under this mode, the operation is similar to the
way SMOV operates decimal numbers. The command copies specific bit number
of arithmetic element S (S is a 4-figure decimal number), and sends the bit
number to arithmetic element D (D is also a 4-figure decimal number). The current
data on the target register will be covered.
m range: 1–4

1
m range: 1–m

2
n range: m

When M1168 = Off (BCD mode), X0 is ON, the instruction transfers two digits of

the decimal number starting from the fourth digit of the decimal number (the digit
in the thousands place of the decimal number) in D10 to the two digits of the
decimal number starting from the third digit of the decimal number (the digit in the
hundreds place of the decimal number) in D20. After the instruction is executed,
the digits in the thousands place of the decimal number (10
of the decimal number (10
S m1 m2 D
Word device
H KnX KnY KnM T
＊ ＊ ＊ ＊ ＊
＊ ＊ ＊
m1
: Data source. : The data source transfers starting bit number.
：The data source transfers individual bit number.
Transferring starting bit number of the destination.
(m cannot be larger than m
1 2
–4 (n cannot be smaller than m
2
) in D20 are unchanged.
0
Chapter 16 PLC Function Applications│CFP2000
n
Nibble movement
16-bit command (11 STEP)
MOV Continuous
C D
execution type
＊ ＊
32-bit command (21 STEP)
＊ ＊
DSMOV Continuous
execution type
Flag signal: M1168
)
1
)
2
16-61
SMOVP Pulse
execution type
DSMOV Pulse
P execution type
D
: Transfer destination.
) and the ones place
3