Delta CFP2000 Series User Manual page 188

12. Display setup
Press to setting menu.
To begin copying parameters until it is done.
When copying parameters is completed, keypad will
automatically be back to this screen.
Press Right key to see the date of copying
parameters.
Press Right key to see the time of copying
parameters.
1. Contrast
2. Back-light
10-15
Chapter 10 Digital KeypadCFP2000
Use Up / Down key to adjust the setting value.
After selecting a setting value. Press ENTER to
see screen's display after contrast is adjusted to
be +10.
When the setting value is 0 Min, the backlight
will be steady on.
Then press ENTER.
After select a setting value Press ENTER to see
screen's display result after contrast is adjusted
to be -10.
Press ENTER to go to "Back Light Time Setting"
screen.
Use Up / Down key to adjust the setting value.
When the setting value is 0 Min, the backlight
will be steady on.