Delta CFP2000 Series User Manual page 493

Chapter 13 Warning CodesCFP2000
ID No. Display on LCD Keypad
93
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
Non-CFP2000 PLC program is
copied to CFP2000
ID No. Display on LCD Keypad
94
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
The PLC copied to CFP2000
exceeds the allowable capacity
ID No. Display on LCD Keypad
95
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
PLC function is enabled when
KPC-CC01 is running copy PLC
Warning Name
Copy PLC version error.
Copy PLC: version
When non-CFP2000 built-in PLC is copied to CFP2000
error (CPLv)
drive, the CPLv warning shows
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Check if the copied PLC program is for CFP2000.
Use the correct CFP2000 PLC program.
Warning Name
Copy PLC: size error
Copy PLC Capacity size error
(CPLS)
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Check if the copied PLC program is for CFP2000
Use CFP2000 PLC program with correct capacity
Warning Name
Copy PLC: PLC KPC-CC01 Copy PLC function should be executed
function (CPLF) when PLC is off
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Disable PLC function first, then run the PLC copy function again
13-42
Description
Corrective Actions
Description
Corrective Actions
Description
Corrective Actions