Delta CFP2000 Series User Manual page 319

Chapter 12 Description of Parameter SettingsCFP2000
Settings
21 RS-485 analog output
Communication card analog
22
output
23 Constant voltage output
Analog Output Gain 1 (AFM1)

Analog Output Gain 2 (AFM2)

Settings
 Adjusts the voltage level outputted to the analog meter from the analog signal (Pr.03-20) output
terminal AFM of the drive.
Analog Output 1 in REV Direction (AFM1)

Analog Output 2 in REV Direction (AFM2)

Settings
AFM2 Output Bias

Settings
Functions
0.0–500.0%
0: Absolute value of output voltage
1: Reverse output 0 V; forward output 0–10 V
2: Reverse output 5–0 V; forward output 5–10 V
Frequency
-100.00–100.00%
12.1-03-18
For RS-485 (InnerCOM / Modbus) control output
Terminal
AFM1
AFM2
AO10
AO11
Communication analog output (CMC-EIP01, CMC-PN01,
CMC-DN01)
Terminal
AFM1
AFM2
AO10
AO11
Pr.03-32 and Pr.03-33 control voltage output level
0–100% of Pr.03-32 corresponds to 0–10 V of AFM1.
0–100% of Pr.03-33 corresponds to 0–10 V of AFM2.
Frequency
Descriptions
Corresponding
address
26A0H
26A1H
26AAH
26ABH
Corresponding
address
26A0H
26A1H
26AAH
26ABH
Default: 100.0
Default: 0
Default: 0.00
Frequency