Delta CFP2000 Series User Manual page 411

Chapter 12 Description of Parameter SettingsCFP2000
Communication Card Gateway Address 4 (for Modbus TCP)

Settings
Communication Card Password (Low word) (for Modbus TCP)

Communication Card Password (High word) (for Modbus TCP)

Settings
Reset Communication Card (for Modbus TCP)

Settings
Additional Setting for the Communication Card (for Modbus TCP)

Settings
Communication Card Status (for Modbus TCP)
Settings
0–65535
0–99
0: Disable
1: Reset, return to default
bit0: Enable IP Filter
bit1: Enable internet parameters (1bit)
When IP address is set, this bit is enabled. After updating the
communication card parameters, this bit changes to disabled.
bit2: Enable login password (1bit)
When you enter the login password, this bit is enabled. After updating
the communication card parameters, this bit changes to disable.
bit0: Enable password
When the communication card is set with a password, this bit is
enabled. When the password is cleared, this bit is disabled.
12.1-09-18
Default: 0
Default: 0
Default: 0
Default: 1
Default: 0