Delta CFP2000 Series User Manual page 80

Chapter 6 Control TerminalsCFP2000
Frame C
Applicable models:
VFD300FP4EA-41/-52/-52S, VFD370FP4EA-41/-52/-52S
Screw torque: 12–15 kg-cm / [10.4–13 lb-in.] / [1.2–1.5 Nm]
1) Remove the keypad. (As shown in figure 6-10)
2) Loosen the screws and press the tabs on both sides to remove the cover. (As shown in figure 6-11)
Figure 6-9 Figure 6-10 Figure 6-11
Frame D0
Applicable models:
VFD450FP4EA-41/-52/-52S, VFD550FP4EA-41/-52/-52S
Screw torque: 14–16 kg-cm / [12.1–13.9 lb-in.] / [1.4–1.6 Nm]
1) Remove the keypad. (As shown in figure 6-13)
2) Loosen the screws and press the tabs on both sides to remove the cover. (As shown in figure 6-14)
Figure 6-12 Figure 6-13 Figure 6-14
6-5