Floor Layout Settings On The Integrated Centralized Control Web - Mitsubishi Electric TRANE TE-50A Instruction Book

5-2-11. Floor Layout settings on the Integrated Centralized Control Web

[1] Matching the floor layout on the TE-200's LCD and the Integrated Centralized Control Web
On the Integrated Centralized Control Web, a setting can be made to use the same layout as the one used on the
LCD.
Note: On the LCD, the floor layout image is divided for display, however on the Integrated Centralized Control Web, it is not divided
for display.
(1) Configure the floor layout settings for LCD for a target centralized controller. (Refer to 5-2-9 "Floor Layout" for
details.)
(2) Using an AE-200/AE-50/EW-50 Initial Setting Tool, configure the floor layout settings for the Integrated
Centralized Control Web. For details on how to use Initial Setting Tool, refer to the AE-200/AE-50/EW-50
Instruction Book (Initial Settings).
Click [Floor Settings] > [Floor for Integrated Centralized Control Web] and select a centralized controller set in
in (1).
(3) Click [Copy floor settings] and select [Floor and floor layout settings].
(4) Click [OK].
The setting contents of the floor layout settings for LCD for the centralized controller set in (1) will be copied to
the floor layout for the Integrated Centralized Control Web.
WT09304X01
LCD
Integrated Centralized Control Web
79
Select a centralized
controller set in the floor
layout settings for LCD.
Copy floor settings