Integrated Time Display - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens

2.16 Integrated Time Display

The integrated time (date, time, power ON time, automatic operation time, automatic start time, external
integrated time 1, external integrated time 2, cycle time) controlled by the NC can be set and displayed.
Note that the cycle time cannot be set. (Cycle time is display only.)
The integrated times displayed in cycle time display area on "Auto/MDI" tag can be set.
Display items
Display item
(1) #1 Date
(2) 2 Time
(3) 3 Power ON
(4) 4 Auto oper
(5) 5 Auto strt
(6) 6 Ext time1
(7) 7 Ext time2
(8) 8 Cycle time
The current date set in the NC is displayed.
Year: 4 digits, Month: 2 digit, Date: 2 digit (YYYY.MM.DD)
The current time set in the NC is displayed with the 24-hour system.
(HH:MM:SS)
This displays the total integrated time of the time from NC power ON to
OFF.(HH:MM:SS)
This displays the total integrated time of the work time from automatic start button
pressing in the memory (tape) mode to M02/M30 or reset button pressing
(HH:MM:SS)
This displays the total integrated time during automatic starting from automatic start
button pressing in the memory (tape) mode or MDI to feed hold stop, block stop, or
reset button pressing. (HH:MM:SS)
This content differs depending on machine tool builder specification.
This content differs depending on machine tool builder specification.
This displays the time that automatic operation is started from when the automatic
start button is pressed in the memory (tape) mode or MDI to when feed hold stop or
block stop is applied or the reset button is pressed.
61
2.16 Integrated Time Display
Details