Adjusting The Color Deadband Value - ENCAD CADJET 2 Service Manual

Calibration
13.1

Adjusting the Color Deadband Value

When adjusting the COLOR DB values, the value for each color is
adjusted separately. Usually, a value of zero or one are the best
values that can be selected for this calibration.
1. With the display set at
press SELECT and the UP ARROW or DOWN ARROW to change
the value. Press SELECT to save the new value.
2. Press the DOWN ARROW. The display will read:
3. Press SELECT and the UP ARROW or DOWN ARROW to
change the value. Press SELECT to save the new value.
4. Press the DOWN ARROW. The display will read:
5. Press SELECT and the UP ARROW or DOWN ARROW to
change the value. Press SELECT to save the new value.
6-58
COLOR DB
YELLOW DB=X
COLOR DB
MAGENTA DB=X
COLOR DB
CYAN DB=X
X = CURRENT VALUE FOR
YELLOW DB
X = CURRENT VALUE FOR
MAGENTA DB
X = CURRENT VALUE FOR
CYAN DB
CADJET 2