Table of Contents
Advertisement
3. Slide the Carriage Assembly back and forth a few times to make
sure it moves easily. Make certain that it travels easily all the way
to the left end of the Slide Shaft so that the Left Cam Actuator
engages the Cutter.
4. Once you have checked the movement of the Carriage Assembly,
go to Section 8.6, Steps 8-12 for the procedure for attaching the
Trailing Cable to the tapes on the Stabilizer Bracket.
5. Reattach the Trailing Cable Cover.
6. Reattach the Left Side Plate and Left Cover Assembly.
Section 8.4.
7. Reinstall the Cartridges and the Top Cover.
CADJET 2
Disassembly/Assembly
See
5-55
Advertisement
Table of Contents
