Plotting Prime Pattern - ENCAD CADJET 2 Service Manual

9.0

Plotting PRIME Pattern

In preparation for plotting the PRIME pattern and for performing the
Electrical Calibration procedures, do the following:
1. The plotter should already be powered up and you should be at
(or, if necessary, go to) the following display:
2. Press the DOWN ARROW once. The display will read:
3. Press SELECT. The display will read:
4. Press the DOWN ARROW. The display will read:
5. Press SELECT and immediately press the UP ARROW.
display will read:
6. Press SELECT and MENU. The display will read:
CADJET 2
MAIN MENU
PRINT MODE
MAIN MENU
UTILITIES
UTILITIES
CALIBRATION→
UTILITIES
OPTIONS=EASY
UTILITIES
OPTIONS=ADVANCED
MAIN MENU
UTILITIES
Calibration
The
6-39