Media Sizes And Plotting Areas - ENCAD CADJET 2 Service Manual

General Information
4.0

Media Sizes and Plotting Areas

The CADJET 2 plotter is designed to recognize specific standard
media sizes by checking the narrow dimension of the media as it is
loaded.
whether Rollfeed media or Sheet media has been loaded. The
media sizes recognized by the plotter and the maximum plotting areas
for Rollfeed media are listed in Table 1.1.
maximum plotting areas for Sheet media are listed in Table 1.2.
Note:
NOTE
1. Initialize unit and load paper.
2. Press the UP ARROW five times until you see the following
display:
3. Press SELECT once to display:
4. Press the UP ARROW twice to display:
5. Press SELECT to view the current maximum plotting areas.
1-6
The Normal and Expanded Plot Areas depend upon
The Expanded setting for the Margins option expands the
plot area and decreases the margins. The current maximum
plotting area may be viewed in the CADJET 2 keypad display
by performing the following steps:
MAIN MENU
PAGE FORMAT
PAGE FORMAT
MARGINS=NORMAL
PAGE FORMAT
PLOT AREA→
The media sizes and
CADJET 2