Deadband Alignment - ENCAD NovaJet Pro 600e Service Manual

4. When the plot is complete, select "Cyan Vertical" at the Color
5. Observe the plot and using either "Prev Option" or "Next
6. Continue until all six calibrations on the Color Calib Menu have

Deadband Alignment

Deadband calibration compensates for minute differences created
when bidirectional printing is used. Unidirectional printing is not
affected by deadband. There are four types of deadband tests:
slow deadband
fast deadband
fast deadband; vertical lines (all)
fast deadband; vertical lines (one)
Calib Menu. This brings up the options menu for the cyan
vertical adjustment as shown in Figure 3-21.
Figure 3-21. Cyan Vertical Options Menu.
Option", rotate through the selections until the one that best
aligns the cyan color on the plot is selected. Press "Ok" to
accept the selection and return to the Color Calib Menu.
been accomplished.
Figure 3-22. Deadband Slow/Fast.
NovaJet PRO 600e Service Manual
Maintenance 3-27