Line Quality Plot (Computer) Test - ENCAD CADJET 2 Service Manual

Calibration

14.0 Line Quality Plot (Computer) Test

1. Press MENU twice. The display will read:
2. Press the UP ARROW until the display reads:
3. Press SELECT. The display will read:
The plotter is now set to NORMAL mode.
4. Connect the parallel cable from the computer to the rear of the
plotter. Load a D-Size sheet with the 36 inch side against the
upper rollers.
5. Turn the computer on. At the C: prompt, type on the keyboard:
6-60
MAIN MENU
UTILITIES
MAIN MENU
PRINT MODE
PRINT MODE
MODE=NORMAL
GO CJ2GS.PLT (for CADJET 2 E-Size plotters)
or,
GO CJ2GSD.PLT (for CADJET 2 D-Size plotters)
CADJET 2