10.0 XY Calibration
1. This procedure allows you to calibrate the X-Axis (also referred to
as the Paper Axis or Vertical Axis) and the Y-Axis (also referred to
as the Carriage Axis or Horizontal Axis).
2. The XY Calibration values are only used when the USE XY
CALIBRATION option is set to ON.
3. When you set the XY Calibration values, all subsequent images
are plotted using the new values until you manually reset the
calibration.
4. XY calibration should not be used for merged vector/raster
images.
CADJET 2
Calibration
6-43