Table of Contents
Advertisement
Color mode
Color mode refers to whether you are printing in color, grayscale or monochrome.
Á
To choose the color mode
1 Press Setup Menu/Print Mode Menu/Color Mode.
2 Choose Color, Mono, Gray or Four Blacks.
3 Press OK.
Dots per inch
For best results, be sure the printer dpi setting matches the image resolution in the file you
are printing.
The printer always prints at 600 dpi, even when the dpi setting in the Print Mode menu is
set to 300 dpi. The dpi setting refers to the resolution at which your image is created, not
the resolution at which it is printed.
Image (file)
resolution
300 dpi
300 dpi
600 dpi
600 dpi
Á
To choose dpi
1 Press Setup Menu/Print ModeMenu/Dots per inch.
2 Choose 300 or 600 resolution.
3 Press OK.
Printer dpi
setting
300 dpi
1 input pixel prints as 4
output pixels.
600 dpi
1 input pixel prints as 1
output pixel.
300 dpi
1 input pixel prints as 1
output pixel.
600 dpi
1 input pixel prints as 1
output pixel.
CADJET
Effect on printed output
The printed image is the
same size as the
original.
The printed image is 1/4
the size of the original.
The printed image is four
times the size of the
original.
The printed image is the
same size as the
original.
®
3D User Guide
Printer Options 2-3
Advertisement
Table of Contents
