ENCAD CADJET 2 Service Manual page 311

PART #
204854 ................................................................................................ ASSY, CARRIAGE
205377 ................................................................................................... MANUAL, USER
204859 ..................................................................ASSY, ADI DRIVER DISK, CADJET 2
204860 ..................................................... ASSY, WINDOWS DRIVER DISK, CADJET 2
204861 ................................................................ ASSY, DOS UTILITY DISK, CADJET 2
204916 .................................. ASSY, BRACKET, DRIVE SHAFT (left bracket w/bushing)
204967 ..............................................................................................MANUAL, SERVICE
204969 ................................................................................... ASSY, ROLLGUIDE, LEFT
204994 ................................................................................ LABEL, SET (identifies keys)
205079 ......................................................................................................FOAM, BLOCK
205107 ................................................................................... LABEL, LOGO, CADJET 2
205128 ......................................... ASSY, STEPPER MOTOR SERVICE (includes Gear)
d
205188................................................. ASSY, HARDWARE KIT CADJET 2, SERVICE
205350 ........ ASSY, STEPPER MOTOR BRACKET, SERVICE (right bracket w/bushing)
Note:
NOTE
CADJET 2
a
If you are ordering the Assy, Top Cover (either P/N 204367-5
or P/N 204367-7; see Sections 2.2 or 2.3), the Stop,
Retracting (P/N 204246) and the Spring, Compression
(P/N 202010) are not included.
separately.
b
These parts make up the Idler Service Assembly.
whole assembly
P/N 203940 Assy, Idler Service rather than ordering the
individual pieces.
c
These parts make up the entire Display Keypad. P/N 203488
includes the Keypad PCB, the Cover, and the Keys; it does
not include the Keypad Cable or the Keypad Label. If the
Keypad Cable (P/N 205111) or the Keypad Label (included in
P/N 204994), they
P/N 203488.
d
The 8 Stand Screws (P/N 203485) are not included in the
Assy, CADJET 2 Hardware Kit, (P/N 205188).
included in the Hardware Kit are the 4 long Stand Screws
(P/N has not yet been determined) which are 1/4 x 20 x 2.5.
All of the Stand Screws are included with the Floor Stand
when it is ordered.
e
The MPCB has the Flash EPROM already mounted, but it is
not programmed.
They must be ordered
is being replaced,
must be ordered
Replacement Parts List
DESCRIPTION
If the
you may order
in addition to
Also not
7-3