Table of Contents
Advertisement
Calibration
6. Type DIR B: (or DIR A:) to make certain that you have the files
listed below:
7. If all the above files are present on your floppy disk, at the C:\
prompt type B:\INSTALL (or A:\INSTALL) to install the Utilities
Disk files onto your hard disk. (Be sure you unzip 205495.ZIP
first.)
8. To use the Emergency Flash ROM Boot Procedure, see
Appendix A of this service manual.
Upgrade, see Appendix B of this service manual.
9. The files CJ2GS.PLT and CJ2GSD.PLT for the Line Quality
Acceptance Standards should be saved for use in Section 14.0,
"Line Quality Plot (Computer) Test."
6-6
INSTALL.EXE*
INSTALL.DAT*
DISK.ID*
USERGUID.TXT
CADUTIL.001*
205495.ZIP**
ENCADXXX.ROM
GO.EXE
MENUTREE.RTL
HOUSED.XPF
4775CD.XPF
*
Files marked with " * " will not be transferred to your hard
drive when the installation is performed.
** 205495.ZIP contains the following files and will also need
to be unzipped:
DOWNLOAD.EXE
DOWNLOAD.HLP
DOWNLOAD.CFG
BDM_CODE.BDC
BDM2CODE.BDC
BDM_DATA.BDT
BDM2DATA.BDT
To do a Printer Firmware
CADJET 2
Advertisement
Table of Contents
