Table of Contents
Advertisement
DESCRIPTION
LOCTITE BLACK MAX ......................................................................................... 200172
MANUAL, SERVICE ............................................................................................. 204967
MANUAL, USER ................................................................................................... 205377
ON/OFF SWITCH (POWER ENTRY MODULE)................................................... 204599
POWER SUPPLY ................................................................................................. 204849
ROLL SUPPORT ............................................................................................... 203868-1
d
SCREWS, STAND.............................................................................................. 203485
SIDEPLATE, LEFT................................................................................................ 204968
SIDEPLATE, RIGHT ............................................................................................. 204973
b
SPRING, COMPRESSION (IDLER) ................................................................... 203447
a
SPRING, COMPRESSION (TOP COVER)......................................................... 202010
SPRING, ROLL HOLDER .................................................................................. 203918-2
a
STOP, RETRACTING......................................................................................... 204246
SUPPORT, DRIVE SHAFT (middle support) ..................................................... 203556-2
Note:
NOTE
CADJET 2
a
If you are ordering the Assy, Top Cover (either P/N 204367-5
or P/N 204367-7; see Sections 2.2 or 2.3), the Stop,
Retracting (P/N 204246) and the Spring, Compression
(P/N 202010) are not included.
separately.
b
These parts make up the Idler Service Assembly.
whole
assembly
P/N 203940 Assy, Idler Service rather than ordering the
individual pieces.
c
These parts make up the entire Display Keypad. P/N 203488
includes the Keypad PCB, the Cover, and the Keys; it does
not include the Keypad Cable or the Keypad Label. If the
Keypad Cable (P/N 205111) or the Keypad Label (included in
P/N 204994),
they
P/N 203488.
d
The 8 Stand Screws (P/N 203485) are not included in the
Assy, CADJET 2 Hardware Kit, (P/N 205188).
included in the Hardware Kit are the 4 long Stand Screws
(P/N has not yet been determined) which are 1/4 x 20 x 2.5.
All of the Stand Screws are included with the Floor Stand
when it is ordered.
e
The MPCB has the Flash EPROM already mounted, but it is
not programmed.
They must be ordered
is
being
replaced,
must
be
ordered
Replacement Parts List
PART #
If the
you
may
order
in
addition
to
Also not
7-7
Advertisement
Table of Contents
