Introduction - ENCAD CADJET 2 Service Manual

Chapter 4
1.0

Introduction

1.
2.
3.
This chapter contains the CADJET 2 Decision Logic Tables (DLT's),
Service Menu information, instructions for using the Front Keypad and
Side Panel keys, and the actions to take when the operation of the
plotter does not appear to be normal.
The Decision Logic Tables list possible remedies to various conditions
of the plotter.
Section 2.1.
Other information in this chapter covers situations that could not be
adequately addressed in a DLT. The Service Menu and the Front and
Side Panel figures aid in the understanding of the plotter tests and how
to scroll through the menu.
CADJET 2
TROUBLESHOOTING
These repair and replacement procedures are intended for
trained personnel.
Disconnect the power cord and remove the interface cables
before fixing the plotter. An electrical shock hazard may
result if these procedures are not followed.
Never allow liquids to come in contact with the plotter
electrical circuitry.
result in an electrical shock hazard and damage to the
plotter.
Information on using the DLT's is given below in
Failure to follow this procedure may
4-1