Upper And Lower Rollers - ENCAD CADJET 2 Service Manual

7.0

Upper and Lower Rollers

1.
WARNING
2.
In order to prevent erratic media movement during plotting, it is
necessary to periodically clean the Upper and Lower Rollers.
To clean the Upper and Lower Rollers:
1. Park the Carriage Assembly in the Service Station.
2. Disconnect the power cord from the plotter.
3. Raise the plotter top cover.
4. Manually turn the 96 Teeth Gear on the Lower Drive Assembly
(the gear is near the Service Station) as you hold a lint-free cloth
that has been moistened with distilled water against the rollers.
Do not allow the cloth to slip between the Upper and Lower
Rollers.
CADJET 2
Do not use alcohol or any other cleansers to clean the
Upper and Lower Rollers. Use only distilled water and a lint-
free cloth.
NEVER attempt to clean the Upper and Lower Rollers by
using the plotter's FEED MEDIA key and the UP or DOWN
ARROWS on the Display Keypad. The cloth could become
jammed in the plotter and cause severe damage. ALWAYS
disconnect the power cord and manually turn the 96 Teeth
Gear on the Lower Drive Assembly.
Maintenance
3-13