Table of Contents
Advertisement
Disassembly/Assembly
The Exhaust must be oriented correctly in order to achieve the
proper vacuum inside the Platen. See Figure Chapter 5 .24.
CAUTION
12. Reinstall the Exhaust on the outside of the bottom of the Platen.
Using a #2 6" or 8" Phillips screwdriver, tighten the screws until
snug.
13. Reinsert the Snap Plug in the bottom of the Platen and turn the
Platen onto its bottom side.
14. Go to Section 11.5.
5-68
CADJET 2
Advertisement
Table of Contents
