Calibrating The Y-Axis (Carriage Axis Or Horizontal Axis Calibration) - ENCAD CADJET 2 Service Manual

Calibration
10.1 Calibrating the Y-Axis (Carriage Axis or Horizontal
Axis Calibration)
1. Load a sheet of D-Size paper (24" side against the rollers). Press
DOWN ARROW. The display will read:
2. Press SELECT. The display will read:
3. Press SELECT. The display will read:
4. Press DOWN ARROW. The display will read:
5. Press SELECT, DOWN ARROW, and SELECT. The display will
read:
6. Press DOWN ARROW. The display will read:
6-44
MAIN MENU
UTILITIES
UTILITIES
CALIBRATION→
CALIBRATION
CARTRIDGE
CALIBRATION
USE XY CALIB=NO
CALIBRATION
USE XY CALIB=YES
CALIBRATION
XY=ENGLISH
CADJET 2