ENCAD CADJET 2 Service Manual page 14

Table of Contents
CHAPTER 5 DISASSEMBLY/ASSEMBLY (continued)
8.0 Left Cover Assembly, Left Side Plate, Carriage Assembly, Trailing Cable,
and Carriage Belt ............................................................................................ 5-30
8.1 Removing the Left Cover Assembly and Left Side Plate ................... 5-30
8.2 Removing the Carriage Assembly ..................................................... 5-32
8.3 Reinstalling the Carriage Assembly ................................................... 5-35
8.4 Reinstalling the Left Side Plate and Left Cover Assembly................. 5-40
8.5 Removing the Trailing Cable.............................................................. 5-41
8.6 Reinstalling the Trailing Cable ........................................................... 5-43
8.7 Removing the Carriage Belt from Carriage Assembly ....................... 5-46
8.8 Installing the Carriage Belt on Carriage Assembly............................. 5-47
9.0 Power Supply and ON/OFF Switch ................................................................. 5-48
9.1 Removing the Power Supply and ON/OFF Switch............................. 5-48
9.2 Installing the Power Supply and ON/OFF Switch............................... 5-49
10.0 Stabilizer Bracket and Encoder Strip............................................................... 5-50
10.1 Removing the Stabilizer Bracket........................................................ 5-51
10.2 Reinstalling the Stabilizer Bracket ..................................................... 5-52
11.0 Lower Drive Assembly, Fan Assembly, and Stepper Motor Assembly
(Inner Platen Parts) ......................................................................................... 5-54
11.1 Disassembly of Plotter Before Removing the Inner Platen Parts....... 5-55
11.2 Removing the Inner Platen Parts ....................................................... 5-57
11.3 Stepper Motor .................................................................................... 5-61
11.3.1
11.3.2
11.4 Reinstalling the Inner Platen Parts..................................................... 5-64
11.5 Reassembly of Plotter After Reinstalling the Inner Platen Parts........ 5-67
12.0 Fixed Blade ..................................................................................................... 5-70
12.1 Removing the Fixed Blade................................................................. 5-70
12.2 Reinstalling the Fixed Blade .............................................................. 5-71
xiv
Removing the Stepper Motor............................................. 5-61
Reinstalling the Stepper Motor .......................................... 5-63
CADJET 2