Partition Configuration (Physical Partition); Setting The Partition Configuration; Figure 3.18 [Partition Configuration] Window Example (Pq2800E) - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation

3.4 Partition Configuration (Physical Partition)

3.4 Partition Configuration (Physical Partition)
This section describes partition configuration. PQ2400E and 2800E are available for these functions. Power off, power on
for every partition is required to reflect the configuration change of partition. All screenshots are display examples. The
displayed contents differ according to the system configuration.

3.4.1 Setting the partition configuration

This section describes addition and removal of operations of SB and IOU.
Adding of SB/IOU
SB and IOU can be added to the partition.
Operations
1. Click [Partition] - [Partition Configuration]
→ [Partition Configuration] window is displayed. For details of [Partition Configuration] window, see "1.3.3 Partition
Configuration] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.18
2. Click the radio button of partition number in which one SB or one IOU is added
3. Click [Add Unit] Button
→ [Add SB/IOU to Partition] window is displayed. Free SB and IOU are displayed in the list. For details of [Add
SB/IOU to Partition] window, see " [Add SB/IOU to Partition] window] of "1.3.3 [Partition Configuration] window" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
.
[Partition Configuration] Window Example (PQ2800E)
32
CA92344-0536-01