Introducing and Preparing the Library
2.5.2.6 Checking the fast load function setting
The fast load function enables the next mount operation during the current mount
operation (without waiting for the drive to become ready) to speed up robot performance.
The factory default is "disabled."
For information on the setting method, see
2.5.2.7 Checking the time and date setting
When you initially set up the library, adjust the clock in the library from the operator
panel or remote panel.
For information on the procedure, see
operator panel) or
The library also supports automatic adjustment using NTP (only the client function). For
information on the setting method, see
2.5.2.8 Checking the remote panel settings
You can manage and monitor your own library from anywhere on the network from an
easy-to-use Web page.
To use the remote panel, you must make the network settings from the operator panel.
For information on the setting method, see
network."
2-10
5.5.4, "Setting the clock"
The library must be restarted for the changes to the network settings
to take effect.
4.5.2, "Setting library information."
4.5.4, "Setting the
clock"(setting made from the
(setting from the remote panel).
4.5.3, "Setting information about the network."
4.5.3, "Setting information about the
Remarks:
C144-E072-01EN