Irmc Microsd Card; Note For Embedded Lifecycle Management (Elcm); Installing The Irmc Microsd Card - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

System board and components
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
17.5

iRMC microSD card

17.5.1

Note for embedded Lifecycle Management (eLCM)

The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
17.5.2

Installing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screwdriver (for cover 2)
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable, remove the expansion card from slot 5 and slot 6, see
"Removing an expansion card" on page
504
50.
Upgrade and Maintenance Manual
Hardware: 5 minutes
50.
55.
278.
49.
RX2540 M7