Irmc Microsd Card; Note For Embedded Lifecycle Management (Elcm); Installing The Irmc Microsd Card - Fujitsu PRIMERGY RX4770 M5 Upgrade And Maintenance Manual

Table of Contents

Advertisement

▶ Install all riser modules and the RAID card, see
cards" on page
"Reassembling" on page
"Installing the server in the rack" on page
"Connecting the power cord (AC PSU)" on page
"Switching on the server" on page
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
14.5

iRMC microSD card

14.5.1

Note for embedded Lifecycle Management (eLCM)

The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
14.5.2

Installing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver (for housing cover)
Preliminary steps
"Shutting down the server" on page
"Disconnecting the power cord" on page
RX4770 M5
190.
53.
Upgrade and Maintenance Manual
System board and components
"Expansion cards and riser
55.
58.
59.
Hardware: 5 minutes
45.
46.
327

Advertisement

Table of Contents
loading

Table of Contents