Note On Safety; Important Alert Messages - Fujitsu SE500 Basic Operating Manual

Important notes

2.3 Note on safety

2.3.1 Important alert messages

v
Warning
Possible damage to the system if used incorrectly
Be sure to follow the precautions below when installing the equipment. Otherwise, the business
server may be damaged.
Possible damage to the system if used incorrectly
In the factory all the power cables are connected to the power distribution units which are integrated
into the rack. Attach the connection cables of the multiple socket outlets to the in-house installation
so that they are easy to access.
Do not connect any additional consumer loads to the power distribution units - this could cause the
nominal load capacity of the multiple socket outlet or feed cables / fuses to be exceeded! If you want
to connect additional equipment, please contact Customer Support.
Possible data loss if used incorrectly
Before shutting down power, you should ensure that the following events occur; otherwise data may
be destroyed.
All applications have finished processing.
No user is using the components.
When a unit of the SE server (MU, SU, HNC or AU) is turned off, the operating status indicator lights
up orange. Check this before shutting down the main power (to UPS, power cable, and power distri-
bution box).
If necessary, back up files before shutting down.
U41858-J-Z126-2-76
CAUTION!
This alert signal indicates a hazardous situation that could result in minor or
moderate personal injury if the user does not perform the procedure correctly. This
signal also indicates that damage to the product or other property may occur if the
user does not perform the procedure correctly.
Note on safety
19