Connectors On The Dsd 510 Servo Drives - Danfoss VLT ISD 510 Operating Manual

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
Table 9: Legend to Type Code
[01–03] Product group
DSD VLT Decentral Servo Drive
®
[04–06] Product variant
510 DSD 510
[07] Hardware configuration
A Advanced
S Standard
[08–12] Current rating
C08A0 8.0 A
rms
[13–14] DC voltage
D6 600 V DC-link voltage
[15–17] Protection rating
E67 IP67
[18–20] Drive feedback
FXX Without feedback/Sensorless
FRX Resolver
FS1 BiSS single-turn feedback 17 bit
FM1 BiSS multi-turn feedback 17 bit
FE1 EnDat 2.1
FE2 EnDat 2.2
FHF HIPERFACE

3.3.3 Connectors on the DSD 510 Servo Drives

The DSD 510 servo drives have the same X1-X5 connectors as the ISD 510 servo drives (see
Drives). In addition to the X1-X5 connectors, the DSD 510 servo drives have 2 further connectors: X6 and X7.
Danfoss A/S © 2020.08
[18–20] (continued)
FHD
[21–22]
PL
EC
PN
[23–25]
SXX
[26]
T
[27–28]
F2
[29–30]
S1
S2
()
[31–38]
–
[39–40]
SX
CX
System Description
Drive feedback (continued)
HIPERFACE DSL
()
Bus system
Ethernet POWERLINK
®
EtherCAT
®
PROFINET
®
Firmware
Standard
Safety
Safe Torque Off (STO)
Frame size
(F2) Frame size 2
Motor connection
(S1) Single plug version motor side
(S2) Dual plug version motor side
Reserved
Reserved
Surface coating
Standard
Customized
3.2.5.1 Connectors on the ISD 510 Servo
AQ262449648484en-000101 / 175R1135 | 31