Danfoss VLT ISD 510 Operating Manual page 216

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
11.11 Protection Ratings
11.11.1 Protection Ratings for ISD 510 Servo Drive
IM B5
Illustration 159: Mounting Positions
Table 155: Protection ratings for ISD 510 Servo Drive
Housing
Shaft without shaft seal
Shaft with shaft seal
-
Install and connect the ISD 510 servo drives as described in this manual to achieve the ratings detailed in
final application.
-
The ISD 510 servo drives are certified by UL as recognized components.
11.11.2 Protection Ratings for DSD 510 Servo Drive
All DSD 510 variants have a protection rating of IP65/IP67.
-
Install and connect the DSD 510 servo drives as described in this manual to achieve the IP65/IP67 rating in the final applica-
tion.
-
The DSD 510 servo drives are certified by UL as recognized components.
11.12 Cables
-
See the VLT® Servo Drive System ISD 510, DSD 510, MSD 510 (VLT® Flexmotion
drawings.
11.12.1 Hybrid Cable PE
Table 156: Hybrid Cable PE
Item Description
Hybrid cable PE Used to connect the PE wire from the hybrid cable to the PE screw on the Decentral
Access Module (DAM 510).
216 | Danfoss A/S © 2020.08
IMV1
Mounting position of servo drive (according to DIN 42 950)
All positions
IM B5 & IM V1
IM V3
IM B5 & IM V1
IM V3
N O T I C E
N O T I C E
N O T I C E
IMV3
) Design Guide for cable dimensions and
™
Specifications
IP rating (according to EN 60529)
IP65/IP67
IP54
IP50
IP65
IP60
Table 155 in the
Cross section
Maximum cross-section:
AQ262449648484en-000101 / 175R1135