Danfoss VLT ISD 510 Operating Manual page 14

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
11.1.2.2 Example Nameplate on the Side of the System Modules
11.2 Characteristic Data
11.2.1 Characteristic Data for ISD 510 Servo Drive without Brake
11.2.2 Characteristic Data for ISD 510 Servo Drive with Brake
11.2.3 Characteristic Data for DSD 510 Servo Drive
11.2.4 Characteristic Data for Power Supply Module (PSM 510)
11.2.5 Characteristic Data for Decentral Access Module (DAM 510)
11.2.6 Characteristic Data for Auxiliary Capacitors Module (ACM 510)
11.3 Dimensions
11.3.1 ISD 510 Servo Drive Flange Dimensions
11.3.2 Dimensions of ISD 510 Servo Drive
11.3.3 Dimensions of DSD 510 Servo Drive
11.3.4 Dimensions of Power Supply Module (PSM 510)
11.3.5 Dimensions of Decentral Access Module (DAM 510)
11.3.6 Dimensions of Auxiliary Capacitors Module (ACM 510)
11.3.7 Dimensions of Expansion Module (EXM 510)
11.4 Motor Overload Protection
11.5 Motor Overtemperature Protection
11.6 Hybrid Cable Protection
11.7 Permitted Forces on the ISD 510 Servo Drive Shaft
11.8 Connectors on the ISD 510/DSD 510 Servo Drive
11.8.1 X1 and X2: Hybrid Connector (M23)
11.8.2 X3: 3rd Ethernet Connector (M8, 4 pole)
11.8.3 X4: I/O and/or Encoder Connector (M12, 8 pole)
11.8.4 X5: LCP Connector (M8, 6 pole)
11.8.5 X6: Standard/HIPERFACE DSL Motor Connector
11.9 Connectors on the System Modules
11.9.1 Backlink Connector
11.9.2 Brake Connectors
11.9.2.1 Brake Resistor Connector on PSM 510
11.9.3 Ethernet Connectors
11.9.3.1 Ethernet Connectors on PSM 510 and ACM 510
11.9.3.2 Ethernet Connectors on DAM 510
11.9.4 I/O Connectors
11.9.4.1 I/O Connector on PSM 510/ACM 510
11.9.5 UAUX Connector
11.9.5.1 24/48 V Cable Cross Sections for PSM 510
11.9.6 LCP Connector (M8, 6-pole)
14 | Danfoss A/S © 2020.08
Contents
AQ262449648484en-000101/175R1135
186
186
186
188
188
189
190
190
191
191
191
194
194
195
195
196
197
197
197
197
198
198
199
200
201
201
202
202
204
204
204
204
205
205
205
205
206
206