Danfoss VLT ISD 510 Operating Manual page 17

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
Certification Description
Part 1: General requirements.
IEC/EN 61508-2
Functional safety of electrical/electronic/programmable electronic safety-related systems.
Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems.
EN ISO 13849-1
Safety of machinery - Safety-related parts of control systems.
Part 1: General principles for design.
EN ISO 13849-2
Safety of machinery - Safety-related parts of control systems.
Part 2: Validation.
IEC/EN 60204-1
Safety of machinery - Electrical equipment of machines.
Part 1: General requirements.
IEC/EN 62061 Safety of machinery - Functional safety of safety-related electrical, electronic, and programmable elec-
tronic control systems.
IEC/EN 61326-3-1
Electrical equipment for measurement, control, and laboratory use - EMC requirements.
Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safe-
ty-related functions (functional safety) - General industrial applications.
IEC/EN 60529 Degrees of protection provided by enclosures (IP Code).
UL 508C
UL Standard for Safety for Power Conversion Equipment.
(Only applies to ISD 510 servo drive sizes 1 and 2.)
UL 61800-5-1
Adjustable speed electrical power drive systems.
Part 5-1: Safety requirements - Electrical, thermal, and energy.
ISD 510 servo drive sizes 3 and 4 and DSD 510:
MSD 510:
CSA C22.2 No.
Standard specifying requirements for adjustable speed drives with respect to electrical, thermal, and en-
274-13 (2013)
ergy safety considerations.
Applies to ISD 510 sizes 1 and 2.
CSA C22.2 No.
Standard specifying requirements for adjustable speed drives with respect to electrical, thermal, and en-
274-17 (2017)
ergy safety considerations.
Applies to:
•
•
•
CE
Danfoss A/S © 2020.08
ISD 510 sizes 3 and 4
DSD 510
MSD 510
Introduction
AQ262449648484en-000101 / 175R1135 | 17