Danfoss VLT ISD 510 Operating Manual page 161

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
Possible Causes
• Fan is not mounted.
• Fan is blocked.
Troubleshooting
• Check if the fan is blocked.
• Check the fan cables for proper connection or damage.
9.3 Error Codes for ISD 510/DSD 510 Servo System
9.3.1 No error (0x0000 / 0x0)
This error code is valid for PSM 510, DAM 510, ACM 510, and ISD 510/DSD 510.
Table 41: No error (0x0000 / 0x0)
Code PROFINET code
®
0x0000 0x0
9.3.2 Generic application error (0x1000 / 0x100)
This error is valid for PSM 510, DAM 510, ACM 510, and ISD 510/DSD 510.
Table 42: Generic err (0x1000 / 0x100)
Code PROFINET code
®
0x1000 0x100
9.3.3 Overcurrent Trip (0x2310 / 0x101)
This error is valid for ISD 510/DSD 510.
Table 43: Overcurr out (0x2310 / 0x101)
Code PROFINET code
®
0x2310 0x101
9.3.4 High cont. current overload (0x2311 / 0x15F)
This error is valid for DAM 510 and ISD 510/DSD 510.
Table 44: High current overload (0x2311 / 0x15F)
Code PROFINET code
®
0x2311 0x15F
9.3.5 Continuous current overload (0x2312 / 0x160)
This error is valid for DAM 510 and ISD 510/DSD 510.
Table 45: Continuous current overload (0x2312 / 0x160)
Code PROFINET code
®
0x2312 0x160
Danfoss A/S © 2020.08
Name Severity (warning/error/trip lock)
No error Error
Name Severity (warning/error/trip
lock)
Generic application error Error
Name Severity (warning/error/trip lock)
Overcurrent trip Error
Name Severity (warning/error/
trip lock)
High cont. current Error
overload
Name Severity (warning/error/
trip lock)
Continuous current Error
overload
Description
No error.
Description
Generic application error.
Description
Overcurrent trip on output.
Description
High continuous current over-
load error.
Description
Continuous current over-
load error.
AQ262449648484en-000101 / 175R1135 | 161
Diagnostics
LCP name
–
LCP name
generic err
LCP name
overcurr trip
LCP name
High curr ovld
LCP name
cont curr ovld