Importing Devices Into Simotion Scout - Danfoss VLT ISD 510 Operating Manual

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
-
Do not remove or rename these libraries.
Procedure
1.
Extract the files from the Danfoss_VLT_ServoMotion_V_x_y_z.zip file (according to the location on the hard drive).
The DDS_Xxxx.xml file and XML_DDS_Xxxx folder must be located together in the same folder to import the library.
2.
In the Project tab, right-click on LIBRARIES and select [Export/import → Import folders/objects].

Illustration 76: Import Library
3.
Select file DDS_Intern.xml according to the location on the hard drive.
4.
Click on OK. Now the library is integrated into the SIMOTION SCOUT
5.
Repeat steps 2–4 for DDS_BasCam.xml, DDS_Drive.xml, DDS_LabCam.xml, DDS_PSM.xml, DDS_DAM.xml, and DDS_ACM.xml.
6.13.5 Importing Devices into SIMOTION SCOUT®
-
For each physical servo drive, PSM 510, DAM 510, or ACM 510, add 1 entry to the PROFINET
Config tool.
Procedure
1.
Open the HW Config tool.
2.
Select [Options → Install GSD File...].
3.
To add a servo drive, select the xml file (according to the location on the hard drive) and click on Install. In the filename, 2.xx
represents the version number and yyyymmdd represents the date.
- GSDML-V2.xx-Danfoss-ISD-yyyymmdd.xml
- GSDML-V2.xx-Danfoss-DSD-yyyymmdd.xml
4. Repeat steps 2 and 3 for:
-
Power Supply Module (PSM 510): GSDML-V2.xx-Danfoss-PSM-yyyymmdd.xml
- Decentral Access Module (DAM 510):
Danfoss A/S © 2020.08
N O T I C E
project.
®
N O T I C E
Commissioning
Ethernet network in the HW
®
AQ262449648484en-000101 / 175R1135 | 109