Danfoss VLT ISD 510 Operating Manual page 166

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
9.3.28 UAUX charging error (0x3297 / 0x154)
This error is valid for DAM 510.
Table 68: UAUX charging error (0x3297 / 0x154)
Code PROFINET Name
®
code
0x3297 0x154 U
error
9.3.29 DC link shutdown error (0x3298 / 0x165)
This error is valid for DAM 510.
Table 69: DC link shutdown error (0x3298 / 0x165)
Code PROFINET code
®
0x3298 0x165
9.3.30 UAUX shutdown error (0x3299 / 0x155)
This error is valid for DAM 510.
Table 70: UAUX shutdown error (0x3299 / 0x155)
Code PROFINET code
®
0x3299 0x155
9.3.31 UAUX undervoltage hardware (0x329A / 0x156)
This error is valid for PSM 510, DAM 510, and ACM 510.
Table 71: UAUX undervoltage hardware (0x329A / 0x156)
Code PROFINET
®
code
0x329A 0x156
9.3.32 Device overtemperature (0x4210 / 0x157)
This error is valid for PSM 510, DAM 510, and ACM 510.
Table 72: Device overtemperature (0x4210 / 0x157)
Code PROFINET Name
®
code
0x4210 0x157 Device over-
temperature
166 | Danfoss A/S © 2020.08
Severity (warning/
error/trip lock)
charging Error
AUX
Name Severity (warning/error/
trip lock)
DC link shutdown Error
error
Name Severity (warning/error/
trip lock)
U shutdown Error
AUX
error
Name Severity (warning/
error/trip lock)
U undervoltage Error
AUX
hardware
Severity (warn-
ing/error/trip
lock)
Warning, error
Description
Load error when U
AUX
mum time limit to charge the AUX line has
been exceeded.
Description
Error when UDC is in shut-
down phase.
Description
Error when U
down phase.
Description
U undervoltage detected by
AUX
hardware circuit.
Description
Triggered when the maximum temperature of the
main device component is exceeded.
PSM: Thyristor rectifier module.
DAM: Maximum temperature of both high side and
low side IGBTs.
Diagnostics
LCP name
is charging. The maxi- UAUX charg
err
LCP name
UDC shutdwn err
LCP name
is in shut- UAUX shtdwn
AUX
err
LCP name
AUX undervol
HW
LCP name
overtemp
device
AQ262449648484en-000101 / 175R1135