Assigning Ip Configuration And Device Name - Danfoss VLT ISD 510 Operating Manual
Servo drive system
Hide thumbs
Also See for VLT ISD 510:
- Operating instructions manual (102 pages) ,
- Design manual (86 pages)
Table of Contents
Advertisement
VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
GSDML-V2.xx-Danfoss-DAM-2Port-IRT-yyyymmdd.xml
GSDML-V2.xx-Danfoss-DAM-3Port-RT-yyyymmdd.xml
-
Auxiliary Capacitors Module (ACM 510): GSDML-V2.xx-Danfoss-ACM-yyyymmdd.xml
5.
Drag the device Danfoss Drive Servo IRT on to an existing PROFINET
Find the servo drive device named Danfoss Drive Servo IRT by expanding the PROFINET IO entry in the hardware
catalog on the right side of the screen and selecting [Additional Field Devices → Drives → VLT
device is not visible, update the hardware catalog by selecting [Options → Update catalog).
6.
Expand Drive Object 1 and folder Profile in the hardware catalog on the right side of the screen and drag the Danfoss Tele-
gram to the free slot of Drive Object 1 at the bottom of the screen.
Illustration 77: Dragging the Danfoss Telegram to a Free Slot
7.
To set the communication parameters, double-click on the icon depicting the servo drive in the main window showing the
Ethernet network.
8.
In the General tab, enter a name in field Device name.
9.
In the General tab, click on the Ethernet... button to set the IP address of the servo drive and then click on OK.
10.
Repeat steps 6–9 for:
-
Power Supply Module (PSM 510): VLT PSM IRT
-
Decentral Access Module (DAM 510): VLT DAM IRT
-
Auxiliary Capacitors Module (ACM 510): VLT ACM IRT
6.13.6 Assigning IP Configuration and Device Name
-
If more than 1 servo drive is used in the same PROFINET
dress.
-
The IP address assignment is also required when using indirect communication via the VLT
Servo Drive System ISD 510, DSD 510, MSD 510 (VLT® Flexmotion
Procedure
1.
Open menu [PLC → Ethernet → Edit Ethernet Node].
2.
In the next window, click on Browse.
110 | Danfoss A/S © 2020.08
Ethernet network.
®
N O T I C E
network, each servo drive must have a different name and IP ad-
®
) Programming Guide for further information).
™
Commissioning
FlexMotion]. If the
®
Toolbox software (see the VLT®
®
AQ262449648484en-000101 / 175R1135
Advertisement
Table of Contents
