Danfoss VLT ISD 510 Operating Manual page 111

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide

Illustration 78: Edit Ethernet Node
All accessible Ethernet nodes are shown in this window.
The ISD 510 servo drives are listed under device type VLT® ISD 510.
The DSD 510 servo drives are listed under device type VLT® DSD 510.
3.
Select the desired servo drive and click on OK (use the Flash button to identify the specific servo drive).

Illustration 79: Selecting the Servo Drive
4.
In the Edit Ethernet Node window, select the option Use IP parameters.
5.
Enter the IP address and Subnet mask and click on Assign IP configuration.
Danfoss A/S © 2020.08
Commissioning
AQ262449648484en-000101 / 175R1135 | 111