Danfoss VLT ISD 510 Operating Manual page 199

VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
C
D
PE
2
8
5
Illustration 136: Pin Assignment of X2 Female Hybrid Connector (M23)
Table 129: Pin Assignment of X1 and X2 Hybrid Connectors (M23)
Pin Description Notes
A UDC- Negative DC supply
B UDC+ Positive DC supply
C AUX+ Auxiliary supply
D AUX- Auxiliary supply ground
PE PE PE connector
2 STO+ Safety supply
3 STO- Safety supply ground
5 TD+ Positive Ethernet transmit
6 RD- Positive Ethernet receive
7 TD- Negative Ethernet transmit
8 RD+ Negative Ethernet receive
11.8.2 X3: 3rd Ethernet Connector (M8, 4 pole)
The ISD 510/DSD 510 advanced servo drives have an additional fieldbus port (X3) for connecting a device that communicated via
the selected fieldbus.
3 2
4 1
Illustration 137: Pin Assignment of X3 3rd Ethernet Connector (M8, 4 pole)
Danfoss A/S © 2020.08
B
A
3
7
6
Rating/parameter
Operating voltage: 565–680 V DC, maximum 778 V
Negative DC supply (maximum -15 A/25 A)
Operating voltage: 565–680 V DC, maximum 778 V
Positive DC supply (maximum 15 A/25 A)
24-48 V DC±10%, 15 A
Absolute maximum 55 V DC
15 A
24 V DC ±10%, 1 A
According to standard 100BASE-T
Specifications
AQ262449648484en-000101 / 175R1135 | 199