Honda Accord 2008 Manual page 2756

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:43:53 61TA0000_240_0033

1. Turn the ignition switch to LOCK (0). Disconnect the

negative cable from the battery, then wait for 3

Driver's Airbag

2. Remove the access panel (A) from the steering

wheel, then disconnect the driver's airbag 4P

connector (B) from the cable reel.

Front Passenger's Airbag

3. Disconnect the glove box damper and release the

glove box stop on each side from the dashboard by

pushing them inside (see page 20-160), then

disconnect the connector clip, then disconnect the

front passenger's airbag 4P connector (A) from the

dashboard wire harness.

4. Disconnect both side airbag 2P connectors (A) from

the SRS floor wire harness.

Chapters

Table of Contents