Honda Accord 2008 Manual page 2751

07/11/02 09:43:51 61TA0000_240_0028
SRS
Precautions and Procedures (cont'd)
Spring-Loaded Lock Connector
Some SRS system connectors have a spring-loaded
lock.
Front Airbag Connectors
Disconnecting
To release the lock, pull the spring-loaded sleeve (A)
toward the stop (B) while holding the opposite half of
the connector. Then pull the connector halves apart. Be
sure to pull on the sleeve and not on the connector.
＊１６
Connecting
To reconnect, hold the pawl-side connector, and press
on the back of the sleeve-side connector in the direction
shown. As the two connector halves are pressed
together, the sleeve (A) is pushed back by the pawl (C).
Do not touch the sleeve.
＊１７
24-28
B
A
C
Side Airbag Connector
Disconnecting
To release the lock, pull the spring-loaded sleeve (A)
toward the stop (B) while holding the opposite half of
the connector. Then pull the connector halves apart. Be
sure to pull on the sleeve and not on the connector half.
A
Connecting
Hold both connector halves, and press them firmly
together until the projection (C) of the sleeve-side
connector clicks.
C
＊１８
B
＊１９