Honda Accord 2008 Manual page 2896

07/11/02 09:53:07 61TA0000_240_0173
16. Disconnect the ODS unit harness 18P connector (A)
from the ODS unit.
＊０６
17. Turn the ignition switch to ON (II).
18. Measure the voltage between the No. 8 terminal of
the ODS unit harness 18P connector and body
ground. There should be 1 V or less.
＊０７
Is the voltage as specif ied?
YES
(see page 24-232).
NO −
replace the ODS unit harness.
ODS UNIT HARNESS 18P CONNECTOR
Wire side of female terminals
−
Faulty ODS unit; replace the ODS unit
Short to power in the ODS unit harness;
19. Turn the ignition switch to LOCK (0).
20. Disconnect the ODS unit harness 3P connector (A)
from the front passenger's weight sensor (front
inner side).
A
21. Read the DTC.
Is DT C 14-14 indicated?
YES − Go to step 22.
−
NO Faulty front passenger's weight sensor (front
inner side); replace the seat frame including all four
front passenger's weight sensors (see page 24-230).
22. Turn the ignition switch to LOCK (0).
23. Disconnect the ODS unit harness 18P connector (A)
from the ODS unit.
＊０８
A
＊０９
A
(cont'd)
24-173